TOBIN MANUFACTURING designs and manufactures meter, mix and dispense machines using positive displacement piston rod metering pumps feeding dynamic, static or impingement mixers for processing temperature controlled or hot cast urethane elastomers, urethane foams or epoxies.  Tobin also provides spare parts, helix mixers, mix heads and service for DECKER foam machines.
HOT CAST DUB-L-BAR 

The Tobin Dub-L-Bar is easily and economically configurable to process pre-polymers with curatives including MbOCA or HQEE with the addition of multiple heat zones for the pumps, check valves, manual recycle valves, hoses, mix head and tanks. Temperatures to 350 degrees F can be attained with no cold spots. Each zone can be controlled separately as required.

Tobin metering pumps are extremely reliable and accurate for use with hot cast urethanes because positive shut-off, aircraft grade inlet and outlet valves are employed that eliminate any chance of product leaking and causing an off ratio condition when the pumps cycle. Additionally, the cycle rate of the pumps can be changed while dispensing and still not go off ratio.

We will be happy to demonstrate the reliability of our Hot Cast machine at our facility in Redlands, California. Contact us to schedule a demo at your convenience.
| HOME | ROTOKAM | DUB-L-BAR | DIB-L-BAR HOT CAST | TURNTABLES | SERVICE & ACCESSORIES | CONTACT US | ABOUT US | CUSTOM QUOTE | SITE MAP |
   
©2007--2011 Rhino Linings Corporation    web site construction by: Scatchet Head Road Studio